For over two decades, KEBA Fastenings has been a trusted supplier of specialized fasteners across diverse industries. We offer comprehensive selection, from micro screws to large, anti-vibration bolts engineered for long-lasting performance.

$1.00

is a special fastener designed for reliability and an easy direct assembly into thermoplastics.

Polymate20 Screw

$1.00

is engineered for direct assembly of thin walled and flat designed thermoplastic components.

Polymate30 Screw

$1.00

is a thread-cutting fastener designed to meet the demanding requirements of thermoset plastics with easy assembly coupled with a strong, reliable joint to ensure optimized assembly performance.

Polymate Type Duro Screw

$1.00

is a unique fastener designed for quick and easy assembly into thermoplastics as well as light metals and steel.

Polypress Fastener

$1.00

is the new era in self-tapping screws for light alloy materials provided in alternate materials with a wide variety of plating and coating options.

Alumate Plus

$1.00

are self-tapping screws designed to securely mount thin sheet metal joints.

K-Tracs Screws

$1.00

are designed to lock into a hole while allowing the fastened components to be detached without the complete removal of the screw itself.

Captive Screws

$1.00

range consists of individually designed engineering solutions resulting in the creation of innovative and complex fastening elements formed in up to six blows.

KEBA Form

$1.00

by combining multiple parts such as a captive washer and screw into a single versatile fastener, KEBA SEMS screws provide efficiencies both in design and manufactoring.

SEMS Screws

$1.00

is designed by engineers as a pre-assembled fastening system to provide all around efficiency.

KEBAFIXX

$1.00

provide precise performance for small components with a range consisting of self-tapping and metric standards as well as any threads according to customer specific applications.

High Performance Anti-Loosening Bolt Achieve powerful anti-loosening performance by applying normal tightening Accomplish downsizing with enhanced axial force and increased fatigue strength Dramatically cut costs through a streamlined design without…

Motiontite

$1.00

provides Turned Parts through applying a Cold Formed process creating cost-efficiency, higher tolerances, variable designs and quicker production times.

Open Die Technology

$1.00

The KEBA BALLSTUD has been developed to withstand extremely high loads and can be set fully-automatically in a progressive tool or transfer tool. Thus, the downstream operation for the orbital…

BallStud

$1.00

are bolts hot forged from all common materials including stainless, acid resistant and heatproof (inductive hardening, case hardening, quenched and tempered) steel.

Hot Bolts

$1.00

are threaded bolts suitable for the automotive industry and heavy earth moving equipment.

Spring Bolts

$1.00

Keeping Railways on Track and on Point with Intelligent Fastening Solutions from KEBA Fastenings Imagine a world without railways.

Railway

$1.00

with a vast machine park, a wide array of materials can be used to provide customer specific products.

Turned Parts

$1.00

The most secure self-locking fastening solution for extreme vibration conditions utilized by a unique wedge principle. FIXXLOCK has been successful in many industries including railways, civil engineering, heavy machinery, radar…

Fixx Lock Nut

$1.00

are precise stampings created from steel, stainless steel and aluminum materials.

Stamped Parts

$1.00

are non-threaded inserts engineered to protect plastics from loads created by the tightening process of the bolts, also referred to as a compression limiter.

KEBAROLL

$1.00

“TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties LLC.” The TORX® Drive System was specifically designed to provide a simple, cost-effective solution to the problems inherent in the process…

TORX® INTERNAL

$1.00

TORX® EXTERNAL

$1.00

TORXALIGN®

$1.00

TORX® TAMPER RESISTANT/ RESISTORX®

$1.00

AUDITORX®

$1.00

TORXSTEMTM

$1.00

TORX® DUAL DRIVE

$1.00

PlasTORX®

$1.00

“TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties LLC.” Since its introduction, TORX PLUS® Drive has consistently outperformed every other drive system. The true 0˚ drive angle virtually…

TORX PLUS® Drive System Internal

$1.00

TORX PLUS® Drive System External

$1.00

External Low & Ultra Low Profile

$1.00

TORX PLUS® Dual Drive

$1.00

“TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties LLC.”

Since its introduction, TORX PLUS® Drive has consistently outperformed every other drive system. The true 0˚ drive angle virtually eliminates the radial forces and stresses. Reduced contact stress also reduces coating damage that can occur in other recess designs. The straight, vertical sidewalls of the TORX PLUS® Drive System virtually eliminates cam-out. The elliptically-based geometric configuration of the TORX PLUS® Drive System maximizes engagement between driver and fastener. Ergonomic studies demonstrate that the TORX PLUS® Drive System can reduce fatigue and muscular stress during the manual assembly of fasteners. That is because little or no end load is required to keep the driver engaged with the fastener. Its longer tool life and optimal torque transfer have enhanced product reliability, increased productivity, and reduced total assembly costs on assembly lines in a multitude of industries around the world.

TORX PLUS® Stick fit bit

A taper along the flute centerline suited for non-magnetic horizontal and vertical applications.

Stable stick-fit between drive tool and recessed part.
Suitable for manual and automated applications where the orientation of the fastener changes between the time the fastener is engaged on the bit and the time the fastener enters the nut thread

TORX PLUS® Stick Fit

$1.00

TORX PLUS® Autosert®

$1.00

TORX PLUS® Tamper Resistant

“TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties LLC.”

Tamper-Resistant AUTOSERT® TORX PLUS® Drive

Combine the automation benefits of the AUTOSERT® feature with the tamper-resistant TORX PLUS® to get manufacturing benefits and security benefits for the end user.

Tamper-Resistant Autosert®

$1.00

TORX PLUS® A Oversize

$1.00

TORX PLUS® Maxx

$1.00

various screw drives are available to meet your requirements

Drives

$1.00

various head geometries are available to meet your requirements

Head Styles

$1.00

Surface Treatment

$1.00

Thread Lock Patch

Fastening solutions for all industries

Automotive

Construction

Forestry & Agriculture

Machinery

Manufacturing & Processing

Oil & Gas

Renewable Energy

Mining & Excavation

Railway

White Goods & Electronics

BECAUSE IT’S ABOUT

EXCELLENCE

KEBA most certainly does focus on delivering high-quality products and services; however, to ensure this, there are several different components for which the total quality management system entails. Our policy is arranged to consistently provide quality throughout all of our business aspects.

First and foremost, quality begins with the employees who are continuously trained and are required to attend various continued educational programs throughout the year. This creates a chain of effectiveness from establishing efficient partnerships with certified and approved suppliers to applied safety, appropriate production and regular quality checks to secure our business relationships with our customers.

KEBA maintains, if not exceeds the standards:

- IATF 16949:2016
- ISO 9001:2015
- REACH/RoHS compliancy
- ISIR
- 100% optical sorting
- PPAP documentation of Level 2 and 3 along with IMDS

Quality Details